You can sew swimwear without a serger! So don’t panic if all you have is your regular machine for sewing swimsuit fabric because it’s totally doable. One option is to get the stretch thread mentioned above and just use a straight stitch. The other option is the faithful zig-zag.
Do you need an Overlocker to sew swimwear?
It’s ideal to have a serger but not necessary. A sewing machine will do just fine. I usually combine both my serger and my sewing machine.
Do you need a special sewing machine to make swimsuits?
A serger or a domestic sewing machine can be used for the construction of your project. … Use a serger to sew swimwear fabric right sides together. Standard seam allowance for most swimwear projects is 3/8″. Make sure your blade is engaged, as you will be cutting off approximately 1/8″ as you sew.
What do I need to sew a swimsuit?
- 1-2 yards swimwear fabric.
- 1 yard liner fabric (we used Matte Tricot fabric from Pine Crest)
- Swimsuit pattern of your choice.
- Dritz 1″ Fold-Over Elastic.
- 3/8″ elastic.
- Ball point needle.
- Twin needle.
- Cutting mat.
What do you line swimwear with?
For Seamwork swimwear patterns, we recommend fabric mostly made from nylon, with at least 10-20% Lycra or spandex. You can also look for polyester blends with the same percentage of spandex. Tricot swimwear lining.
Is it hard to sew swimsuits?
Sewing bathing suit fabric is different from sewing other fabrics and you need to test everything out over and over until you find what works for you. And at that point you’ll see that it’s actually pretty easy and you’ll be ready to start working on your bikinis, bathing suits and swim caps!
What material is best for swimsuits?
The best fabric for swimwear is a polyester/elastane blend. Elastane is the super stretchy fabric better known by the brand names Spandex or Lycra. Polyester is colorfast and resistant to chlorine, making it a perfect choice. Nylon is another good fabric for swimwear, but it is more likely to pill over time.
Does bathing suit material fray?
Lycra and spandex material is nearly impossible to sew without causing more tearing and fraying. There are a few other options, but you also might find repairing the swimsuit is simply more work than just replacing it.
What is a serger sewing machine?
A serger, commonly referred to as an overlock machine, combines three functions into one simple operation-stitching a seam, trimming the excess seam allowance and overcasting the edge of your fabric-allowing you to achieve professional quality stitching in a short amount of time. They are very fast!
What type of fabric is used for swimsuits?
Swimsuits are made in a variety of materials, from spandex to Polyester to blends of polyester and spandex, and nylon. Polyester and Spandex are two common swimsuit materials, and each have their own strengths.
How much fabric is needed for a swimsuit?
FABRIC REQUIRED: 58″ or 60” (150 cm) wide fabric. 1 yard (7/8 meter) of swimwear fabric, 1 yard (7/8 meters) of lining fabric. If you are lining with the same swimwear fabric: 2 yards (1 ¾ meters) of swimwear fabric for exterior and lining.