How do you mark plastic bobbins?
Basically, I just cut out the number from the label and tape it to the bobbin. I needed a way to make sure it’s securely on there and that it doesn’t cover the hole. So I use a long strip and have it half on the side of the bobbin. I then clut a slit into the tape just below the curve.
How do you use a plastic bobbin winder?
Notches on the bottom of the bobbin winder allow it to perch upright on the edge of a bobbin box. To use a bobbin winder, first remove the peg that holds the bobbin. Insert a bobbin into the slot, lining up the hole on the bobbin with the hole in the winder. Reinsert the peg to secure the bobbin.
Do you thread the bobbin through the needle?
Thread from the spool goes through the needle’s eye. Thread from the bobbin comes up through the needle plate.
Why is my bottom bobbin not catching?
First, your needle may be dull or damaged and needs to be replaced. You should also check that you are using the correct needle for the type of fabric you are sewing. … If the needle is not inserted correctly, it will not be able to pull up the bobbin thread and will cause skipped stitches.