If you imagine the needle thread and bobbin thread as having a tug of war, the stronger one will pull the other one to its side. If the bobbin thread is on top, that means the top thread is pulling more, or, has more tension. That means either the top thread is too tight or the bobbin thread is too loose.
Why is my bobbin thread showing on my embroidery machine?
The embroidery tension page will appear. – If the upper tension is too tight the bobbin thread with be showing on the top side of the material. Press the minus key on the screen to loosen the tension. – If the upper tension is too loose most of the upper thread will be showing on the bottom the material.
Why does the thread from the bobbin bunch up?
If the thread has knots, is not smooth, is uneven, or is loose on the bobbin, then it has not been threaded correctly. If your machine uses a bobbin case, follow your sewing machine’s instructions to remove the bobbin from the case and re-thread it. … Be sure that you have the bobbin thread engaged in the bobbin tension.
What tension should my embroidery machine be on?
When doing machine embroidery, the tension dial should be set somewhere between 2 to 6. If the stitches appear loose, turn the tension up one notch and embroider again.
How do I know if my bobbin tension is correct?
The thread should unwind just slightly and the bobbin case should drop an inch or two. If the thread unwinds without resistance and the case slips to the floor, your bobbin tension is too loose. If the bobbin case doesn’t budge, your bobbin tension is too tight.
Does the bobbin thread show on top or bottom?
Your bobbin thread should not show through the top layer of stitching. It will only be seen on the back of the item. The reason you want to use a lightweight thread is to avoid too much bulk on the back of the item.
Why is my bobbin thread showing on top Janome?
When you see the bobbin thread come through to the top, this means that there is no tension on the bobbin thread to hold it back. Try removing and reinserting/rethreading the bobbin in the bobbin case. … Improper bobbins can be too tight or loose in the bobbin case.
How do I fix bobbin thread bunching up?
How to Fix Bobbin Thread Bunching and Other Threading Problems
- Thread the Machine Properly. Re-thread the upper part of the sewing machine making sure the thread is passing through every single thread guide on its way to the needle. …
- Change the Needle. …
- Inspect the Bobbin. …
- Clean the Machine.
How do I stop my sewing machine from bunching up?
A good cleaning may solve your bunching woes (check your manual for guidelines on cleaning and maintenance; your machine may also need to be oiled). To prevent stitch glitches, be sure to frequently dust underneath the throat plate and along the thread path, and to periodically clean and oil your machine.
Why is my sewing machine bunching up the fabric?
If your fabric is puckering while sewing you can cut the top and bottom threads along a short section of stitches. You can tell that if this relieves the bunching up, then your tension is too tight. If your seam puckering is visible and affects the look of your garment you’ll need to unpick and start stitching again.
Why is my bobbin thread looping?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
Why is my embroidery bunching up?
The main source of birdnesting or looping is improperly inserted or threaded bobbin or running the embroidery machine with no bobbin. … A tight bobbin tension, together with highly loose needle thread tension, can cause birdnesting. Flagging occurs when the hoop bounces up and down during sewing.