The order that the bobbin thread should be passed through the bobbin case is indicated by marks around the bobbin case. … Pull up the bobbin thread, pass it under the presser foot and pull it about 10 cm (4 inches) toward the back of the machine, making it even with the upper thread. Reattach the bobbin cover.
Does thread go under presser foot?
Double check to make sure the thread is through the tension properly. Once you’ve threaded the needle, put the thread straight back (but not under the presser foot). Keep the presser foot up, and note that the thread should be fairly easy to pull.
There’s also the thread from the bobbin. It’s located at the bottom of the sewing machine. This thread comes up through the needle plate. Thread from the spool goes through the needle’s eye.
Should presser foot be up or down when threading machine?
If the presser foot is up when you thread, your thread will slide right between the discs and then, as you sew, it will be properly regulated by your machine. If you thread your machine with your foot down, the thread will most likely not slide between the tension discs.
Why is my sewing machine not grabbing the bobbin thread?
There could be several things that could cause the machine not to pick up the bobbin thread. The upper thread could be tangled. Remove the thread completely from the machine. The correct size spool cap should be used for the size of the thread spool.
Why should you put the presser foot down while sewing?
Downward pressure on the presser foot holds the fabric between the feed dog and sewing machine foot. The amount of pressure would need to vary if you were switching between lightweight sheer fabric and multiple layers of denim for the machine to feed the fabric evenly.
What holds the needle in place on a sewing machine?
Needle clamp-holds the needle in place.
What happens when you hold the latch on the bobbin case?
A bobbin case, when used with the correct bobbin, will hold the bobbin snugly in place, which will allow the machine to neatly unravel it. The bobbin case also adds tension to the bottom thread, much like the tension assembly for the top thread. … If there is not, re-thread the bobbin through the bobbin case.
What is the difference between bobbin thread and regular thread?
Since bobbin thread is a thinner thread, it will not be as overpowering as regular weight sewing thread. A machine blind stitch sewn with bobbin thread on sheer fabric can be much more invisible than if it is sewn with regular thread.
Why is my bobbin thread bunching up when I sew?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.