Frequent question: How do you make a bed pillow case?

How much material do you need to make a standard pillowcase?

A finished standard pillowcase should measure about 22.5 inches by 31.5 inches, allowing for fill depth, seaming and an approximate 4-inch hem. One yard of 45-inch-wide fabric should be enough to make one standard case, if the material is preshrunk.

How do you make an envelope pillow case for a bed?

METHOD:

  1. Step 1: Measure your pillow.
  2. Common bed sized pillows are the following sizes:
  3. Step 2: Measure and cut out your pillowcase pieces.
  4. Step 3: Finish both ends of your pillowcase.
  5. Step 4: Sew 3 sides of your envelope pillowcase together.
  6. Step 5: Sew down the flap.
  7. Step 6: Finish the edges.

What fabric are pillowcases made of?

When choosing a pillowcase, there are a few standard fabric options. Cotton is known for being soft and breathable, and it can often provide a luxe feel for an affordable price. Microfiber and polyester are also inexpensive and wrinkle-resistant. For a more luxurious feel, go for silk or linen.

What is the best material for a pillowcase?

Here are the best pillowcase materials:

  • Cotton. One of the most popular pillowcase materials is cotton. …
  • Nylon. Another common pillowcase fabric, nylon is typically made to look like silk. …
  • Linen. Linen is a high quality, natural flax product that is no longer produced in quantity. …
  • Satin. …
  • Silk.
THIS IS UNIQUE:  How much Stitch movies are there?

How do you make an envelope pillow cover with one piece of fabric?

Instructions

  1. Wash the fabric.
  2. Cut the fabric to pillow size.
  3. Create a double-fold hem on smaller ends of cut fabric.
  4. Overlap the fabric to give you the size of the pillow form, pin, and sew a 1/2″ seam.
  5. Trim corners then turn fabric right side out. Then insert the pillow form into the pillow cover and enjoy!

What stitch is used in making pillowcases?

Be sure to remember to zig-zag stitch (or use a Serger) along the entire edge. After zig-zag stitching the long side of the pillowcase, stitch the end of Fabric A closed with a ¼” seam allowance, locking your stitch at both the beginning and the end. Then, finish the raw edge with a zig-zag stitch as well.