Insert the bobbin making sure the bobbin rotates counterclockwise when you pull the thread. NOTE: This is a very important step as the bobbin can become unthreaded and cause sewing problems if it rotates clockwise. 4. Pull the thread through the slot (A) and then to the left.
Where do you put a threaded bobbin and where does the thread from the bobbin go when the machine is in use?
Insert bobbin counterclockwise
Place your bobbin inside. Make sure the thread unwinds to the left (counterclockwise direction). Guide the thread through the slit in the needle plate cover. This is important because it makes the thread enter the ‘tension spring’ of the bobbin case.
Where does a threaded bobbin go?
Place your bobbin in the round slot; your machine will have an arrow showing which way the bobbin should face to unspool correctly. Then, pull the end of the bobbin thread through your machine’s tension spring and replace the bobbin cover.
Where is the bobbin case located?
Front loading bobbin cases are removed and inserted on the side of the sewing machine facing the user. These are the most common on modern machines with a removable bobbin.
Which way should thread come off spool?
Generally speaking stacked thread should be placed on a vertical spool pin on the sewing machine. The thread should leave the spool at a RIGHT angle, in line with the direction of the wound thread. This will stop the thread catching on the grooves at the end of the spool.
Why is my bobbin thread not catching?
Check the upper thread. – Check to see if your upper tension is too tight. … – Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. – Make sure that the upper thread is threaded properly.
Why won’t my singer pick up the bobbin thread?
First, make sure the bobbin-winding spindle (located on top of your machine) has been pushed back to the left for sewing. If it is not in the correct position, the needle will not go down and pick-up your bobbin thread. … If the timing is out, the needle thread is not meeting the bobbin thread in time to form a stitch.