First, make sure the bobbin-winding spindle (located on top of your machine) has been pushed back to the left for sewing. If it is not in the correct position, the needle will not go down and pick-up your bobbin thread. … If the timing is out, the needle thread is not meeting the bobbin thread in time to form a stitch.
Why is my sewing machine not grabbing the bobbin thread?
There could be several things that could cause the machine not to pick up the bobbin thread. The upper thread could be tangled. Remove the thread completely from the machine. The correct size spool cap should be used for the size of the thread spool.
Why is my bobbin not winding?
If your bobbin does not wind quickly and smoothly when you press on your foot pedal, your bobbin winder might not be fully engaged. This can cause uneven winding. Make sure you push your bobbin pin all the way over or loosen your bobbin wheel completely to engage your bobbin winding mechanism.
Why is my bobbin winder not working?
Check if you aligned the groove in the bobbin with the spring on the bobbin winder shaft and pressed down on the bobbin until it snapped into place. Check if the thread is passed through the bobbin winding guide correctly. Check if there are scratches or other defects on the bobbin. Replace the bobbin if in doubt.
Do you thread the bobbin through the needle?
Thread from the spool goes through the needle’s eye. Thread from the bobbin comes up through the needle plate.
How do you tell if your bobbin tension is off?
Swiftly pull up on the thread. The thread should unwind just slightly and the bobbin case should drop an inch or two. If the thread unwinds without resistance and the case slips to the floor, your bobbin tension is too loose. If the bobbin case doesn’t budge, your bobbin tension is too tight.
Why do sewing machines lock up and won’t sew?
Sewing Machine: Why does my sewing machine lock up? Thread bunched up in the shuttle race often causes the sewing machine to lock up. … Clean lint and debris out of the shuttle race; they can prevent the needle from hooking the thread, resulting in thread bunching up in the shuttle race and jamming the needle.
Is bobbin supposed to spin?
Be sure the bobbin is inserted so that the bobbin will turn clockwise when the thread is pulled. … The bobbin should be turning clockwise when thread is pulled. If the thread unrolls in the wrong direction, it may cause the thread tension to be incorrect or break the needle.
Why won’t my bobbin wind on my Brother sewing machine?
Swing up the bobbin thread spool pin. Move the bobbin thread spool pin up as far as possible. … Slide the bobbin winder shaft to the right. NOTE: If the correct size bobbin is not used at this time; when the bobbin winder is engaged; the bobbin winder will make a usual noise and not wind the bobbin correctly.
Which holds the bobbin in the sewing machine?
The bobbin case holds the bobbin. It is usually not interchangeable between machines.